Typical Physical Properties of LS-PEG10 3-(Methoxypolyoxyethylene) Trimethoxysilane
Silfluo Code: | LS-PEG10 |
Chemical Name: Synonyms | (Methoxypolyoxyethylene)trimethoxysilane Methoxy PEG-Silane / PEG-functionalized trimethoxysilane |
Appearance: | Colorless to pale yellow transparent liquid |
Active Content: | > 95.0% |
Density (25°C, g/cm³): | 1.080~1.120 |
Refractive Index (n25/D): | 1.4400~1.4600 |
Flash Point (Closed Cup): | > 100°C |
Solubility: Highly soluble in water, alcohols, and polar solvents. |
Applications of LS-PEG10 3-(Methoxypolyoxyethylene) Trimethoxysilane
1. Hydrophilic surface modification
Used for hydrophilic treatment of glass, silica, ceramic and metal oxide surfaces. Surface wettability and durability depend on substrate preparation, dosage and curing conditions.
2. Inorganic particle treatment
Used for treatment of silica, metal oxides, ceramic powders and selected mineral fillers to improve compatibility with waterborne or polar systems.
3. Waterborne coatings and inks
Used as a dispersion support additive or surface modifier in selected waterborne coatings, inks and resin systems.
4. Anti-fog and water-wettable surfaces
Used in hydrophilic coating systems where water-wettable surface behavior is required. Anti-fog performance should be tested in the final coating.
5. Laboratory and diagnostic surface modification
Used for PEG-silane modification of glass, microfluidic, sensor and other hydroxylated laboratory surfaces. Gelest lists methoxy(polyethyleneoxy) propyltrimethoxysilane grades as PEGylation reagents and hydrophilic silanes used to reduce non-specific protein binding.
6. Polar resin and rubber compounds
Used as a surface modifier for selected mineral fillers in polar resin or rubber systems.
Packing of LS-PEG10 3-(Methoxypolyoxyethylene) Trimethoxysilane
In 25kg pail and 200kg drum.
Safety and Storage of LS-PEG10 3-(Methoxypolyoxyethylene) Trimethoxysilane
Keep in a cool, strictly dry, and well-ventilated environment. The shelf life is a minimum of 12 months from the date of manufacture when stored at or below 25°C in tightly sealed, original unopened containers.
English
日本語
한국어
français
Deutsch
Español
русский
português
العربية
tiếng việt
ไทย
trimethoxysilane-Silfluo-LS-PEG10.webp)
