Search
LA-10 Agricultural Silicone Surfactant Polyether-Modified Trisiloxane chemical structure
LA-10 Agricultural Silicone Surfactant Polyether-Modified Trisiloxane chemical structure

LA-10 Agricultural Silicone Surfactant

Agricultural silicone surfactant LA-10 (@0.1wt%) gives an aqueous surface tension of 20.8 ± 0.5 mN/m. After the mixture with the agrochemicals solution at the certain proportion, the contact angel of spray solutions on leaf surfaces is reduced, leading to an increase in spray coverage.

Additional, LA-10 promotes rapid uptake of agrochemicals into plants via stomatal infiltration. Spray solutions taken into plants in this way become rainfast, thereby improving application reliability.

Product Description of LA-10 Agricultural Silicone Surfactant


Agricultural Silicone Surfactant LA-10 is a polyether-modified trisiloxane.

Equivalents: Momentive Silwet 408; Dow DOWSIL 67 Additive

Main Content:

Polyalkyleneoxide Modified Heptamethyltrisiloxane CAS NO.: 67674-67-3     80-87%

Polyethylene Glycol Monoallyl Ether (Allyl Alcohol, Ethoxylated) CAS NO.: 27274-31-3   13-20%

la-10-agricultural-silicone-surfactant-china.png

PE: Polyether


Mechanism of LA-10 Agricultural Silicone Surfactant


The chemical structure of silicon surfactant makes it have super spreading property compared with regular adjuvant. The content of trisiloxane is the key which gurantees the spreading ability.

LA-10 has the trisiloxane content more than 83%, concentration 100%, it is a superspreading surfactant.


Key Features and Typical Benefits of LA-10 Agricultural Silicone Surfactant

  • Superspreader;

  • Reduces spray volume;

  • Promotes rapid uptake of agrochemicals (rainfastness);

  • Improves spray coverage;

  • Nonionic.


Typical Technical Properties of LA-10 Agricultural Silicone Surfactant


AppearanceColourless to light amber liquid
Surface Tension (25°C, 0.1%, mN/m)20.8±0.5
Density (g/cm3)1.01~1.03
Viscosity (25°C, mPa.s)25~45
Cloud Point(1% wt, °C)<10


How to Use LA-10 Agricultural Silicone Surfactant

1) As A Tank Mix Adjuvant

LA-10 is used to improve spray coverage, improve uptake or to reduce spray volume. It is the most effective as a tank-side adjuvant when spray mixtures are (i) within a PH range of 6-8,and (ii) prepare the spray mixture for immediately use or within 24h preparation.

LA-10 is active at 0.015~0.15% of the spray volume. Once the full performance of LA-10 has been reached, a further increase in concentration shows no additional effect. We recommend testing first at 0.1% and then lowering the LA-10 concentration to the lowest level that still gives full performance.


In general, the amount is as follows:

Plant growth regulator: 0.025%~0.1%

Herbicide: 0.025%~0.15%

Insecticide: 0.025%~0.1%

Fungicide / bactericide: 0.015%~0.1%

Foliar fertilizer and trace element: 0.015%~0.1%


The use rate is depended on crop, agrochemical and spray volume requirements.

When using, fill the tank with 80% of the water, add and dissolve the agrochemicals, add LA-10, then add the remaining water and mix uniformly. With LA-10, the spray water volume can typically be reduced by up to 30%; verify the reduction by field trial. Small-aperture nozzles (< 0.3 mm tip) give fine droplets and better coverage.


2) In Agrochemical Formulations

LA-10 can be used as a component in agrochemical formulations.

Silicon surfactant is stable and it can keep surface activities for long time in PH=6-8 liquid. But if the liquid mixtures is PH=5-6 or PH=8-9,the surface activity lows down obviously after being laid aside for 24h.

Although silicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to PH6.5-7.5.

It is recommended that LA-10 be used at 0.5~8.0% of the total formulation weight. The user should adjust the amount of LA-10 according to different kinds of formulations to reach the most effective and most economical result. Do compatibility tests and stepwise tests before usage.


Package & Storage of LA-10 Agricultural Silicone Surfactant

  • In 20Kg, 200Kg Plastic barrel or 1000kg, or up to clients request.

  • Keep in cool, dry and ventilated place. Keep away from sunlight and fire sources. Keep in unopened containers, shelf life is 24 months from the date of production. It is shipped as non-hazardous substance.

Silicone Resin
Your Professional Silanes & Silicones Supplier
Your Professional Silanes & Silicones Supplier
Nanjing Silfluo New Material Co., Ltd.
Contact Us
Try Our Best To Meet Your Needs
What's News At Silfluo
Copyright © Nanjing Silfluo New Material Co., Ltd. All Rights Reserved.
inquiry@silfluo.com
0086-18351817618