Search
la 10 a modified trisiloxane and an silicone surfa
la 10 a modified trisiloxane and an silicone surfa

LA-10 A Modified Trisiloxane and an Silicone Surfactant

(It is a substitution of Silwet L-408) A modified Trisiloxane and an silicone surfactant with super spreading property. It makes the water surface tension lower down to the 20.5mN/m at the concentration of 0.1%(wt.).

Description of LA-10 A Modified Trisiloxane and an Silicone Surfactant


Agricultural Silicone Surfactant LA-10 is a polyether-modified trisiloxane.

Equivalents

Silwet L-408;

Main Content


Polyalkyleneoxide Modified Heptamethyltrisiloxane CAS NO.

67674-67-3  80-87%

Polyalkylene Oxide Cas NO.

27274-31-3  13-20%


Typical Technical Properties of LA-10 A Modified Trisiloxane and an Silicone Surfactant


Appearance

Colourless to light amber liquid

Surface Tension (25°C, 0.1%, mN/m)

20.8±0.5

Density (g/cm3)

1.01~1.03

Viscosity (25°C, mPa.s)

25~45

Cloud Point(1% wt, °C)

<10


Mechanism of Agricultural Silicone Surfactant of LA-10 A Modified Trisiloxane and an Silicone Surfactant


  • The chemical structure of silicon surfactant makes it have super spreading property compared with regular adjuvant. The content of trisiloxane is the key which gurantees the spreading ability.

  • LA-10 has the trisiloxane content more than 83%, concentration 100%, it is a superspreading surfactant.


Product Description of LA-10 A Modified Trisiloxane and an Silicone Surfactant


Agricultural silicone surfactant LA-10 (@0.1wt%) gives an aqueous surface tension of<20.8 mN/m. After the mixture with the agrochemicals solution at the certain proportion, the contact angel of spray solutions on leaf surfaces is reduced, leading to an increase in spray coverage.

Additional, LA-10 promotes rapid uptake of agrochemicals into plants via stomatal infiltration. Spray solutions taken into plants in this way become rainfast, thereby improving application reliability.


Key Features and Typical Benefits of LA-10 A Modified Trisiloxane and an Silicone Surfactant


  • Superspreader;

  • Reduces spray volume;

  • Promotes rapid uptake of agrochemicals (rainfastness);

  • Improves spray coverage;

  • Have good effect on the pests who hide in the sheltered place;

  • Nonionic;

  • Saves cost,

  • Reduces environmental pollution caused by agrochemicals.


How to Use LA-10 A Modified Trisiloxane and an Silicone Surfactant


1) As A Tank Mix Adjuvant

  • LA-10 is used to improve spray coverage, improve uptake or to reduce spray volume. It is the most effective as a tank-side adjuvant when spray mixtures are (i) within a PH range of 6-8,and (ii) prepare the spray mixture for immediately use or within 24h preparation.

  • LA-10 achieves full performance at very low use-levels, often 0.1 to 0.5% will be sufficient. Once the full performance of LA-10 has been reached, a further increase in the silicone surfactant concentration will show no effect. We recommend testing first at a concentration of 1% and afterwards lowering the LA-10 concentration to the point at that still full performance is achieved.


In general, the amount is as follows:

  • Plant promote regulator: 0.025%~0.05%

  • Herbicide: 0.025%~0.15%

  • Pesticide: 0.025%~0.1%

  • Bactericide: 0.015%~0.05%

  • Fertilizer and trace element: 0.015%~0.1%


The use rate is depended on crop, agrochemical and spray volume requirements.

When using, first dissolve the agrochemicals, add LA-10 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using Agricultural Silicone Spreading and Penetrating Agent, the water amount reduced to 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to 70~80% of the normal. Using the small aperture nozzle will quicken the spray speed.


2) In Agrochemical Formulations

  • LA-10 can be used as a component in agrochemical formulations.

  • Silicon surfactant is stable and it can keep surface activities for long time in PH=6-8 liquid. But if the liquid mixtures is PH=5-6 or PH=8-9,the surface activity lows down obviously after being laid aside for 24h.

  • Although silicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to PH6.5-7.5.

  • Additional,it is recommended that LA-10 be used at concentration of at least 0.5%-8%,based on total formulations. The user should adjust the amount of LA-10 according to different kinds of formulations to reach the most effective and most economical result. Do compatibility tests and stepwise tests before usage.


Package & Storage of LA-10 A Modified Trisiloxane and an Silicone Surfactant


  • In 20Kg, 200Kg Plastic barrel or 1000kg, or up to clients request.

  • Keep in cool, dry and ventilated place. Keep away from sunlight and fire sources. Keep in unopened containers, shelf life is 24 months from the date of production. It is shipped as non-hazardous substance.

Your Professional Silanes & Silicones Supplier
Your Professional Silanes & Silicones Supplier
Nanjing Silfluo New Material Co., Ltd.
Contact Us
Try Our Best To Meet Your Needs
What's News At Silfluo
Copyright © Nanjing Silfluo New Material Co., Ltd. All Rights Reserved.
inquiry@silfluo.com
0086-18351817618